SBDH 200 ELECTRIC DESICCANT DEHUMIDIFIER
INFORMATION
Additional Technical Documents
FEATURES
- ANSI lifting bar made with dual 12 gauge 304 stainless steel angle
- 18 gauge 304 stainless steel casing, access doors and panels
- Three smooth sides for easy handling with hand truck and when transporting below deck
- Solid state PTC heater elements – no requirement for high temperature limit switch
- Gasketed access panel for user mounted data logger
- Easily accessible UL approved control panel on top of unit
- All circuits protected with circuit breakers – no fuses
- Electronic humidity sensor and LED control panel
- Automatic phase switch
- Full access to internal components from two sides
- Two blowers, process and reactivation
- Process blower operates continuously, while reactivation heaters activate with humidity load
- Three 80 micron/10 micron disposable pleated paper filters in: process inlet, process outlet and reactivation supply
- Filters are 10-Micron 1st stage and 80-Micron 2nd stage part # CFS- 8H-105W-7/8 NSN 4130-01-548-1951
SPECIFICATIONS
SBDH 200 DESICCANT DEHUMIDIFIER | |
---|---|
CFM | 200 |
Static Pressure | 2" |
Voltage | 480 |
Phase | 3 |
Hertz | 60 |
Full load amps | 10 |
Process inlet size | 4” Flange |
Process outlet size | 4” Flange |
Weight | 175 |
L x W x H | 20” x 17” x 35” |
Lifting Bar | Yes |
MILITARY 2 STAGE FILTERS 10/80 MICRONS | |
---|---|
Process Inlet Qty 1 | 8”x10.5”x7/8” |
Process Outlet Qty 1 | 8”x10.5”x7/8” |
React. Inlet Qty 1 | 8”x10.5”x7/8” |